top of page
This site was designed with the
.com
website builder. Create your website today.Start Now

- Claude Bernard -

“The joy of discovery is certainly the liveliest that the mind of man can ever feel”

Publications

List of Papers published in National & International Journals (only selective)

  1. Fiber Reinforced Polymer Nanocomposites for Structural Engineering Applications, Bhuvaneshwari Balasubramaniam, Govindasamy Sathiyan, Gadyam S. Palani, Nagesh R. Iyer, and Raju Kumar Gupta, Materials Science and Technology, Wiley, 2019, pp. 1-20

  2. Electrochemical and microstructural analysis of azomethine polyamides as inhibtor for rebar corrosion under chloride contaminated pore solution, Bhuvaneshwari Balasubramaniam, Athiramu Selvaraj, Nagesh R. Iyer, Lingam Ravikumar, Prabhat K. Rai, K. Mondal, Raju Kumar Gupta, Frontier Research Today, Vol 1 (article 1004), 2018

  3. Influence of prestressing the textile on the tensile behaviour of textile reinforced concrete, S Gopinath, R Gettu, Nagesh R. Iyer, Materials and Structures 51 (3), 64, 2018

  4. Fracture Analysis and Remaining Life Assessment of Ultra High Strength Concrete Beams, AR Murthy, Nagesh R. Iyer, BKR Prasad, Advances in Structural Integrity, 157-165, 2018

  5. Nutritional behavior, morphogenesis cycle and sediment consolidation capabilities of the calcareous bacteria derived from coastal marine sediments, S Krishnamoorthy, M Annaselvi, AR Murthy, Nagesh R. Iyer, Geomicrobiology Journal 34 (9), 795-803, 2017

  6. Hydration Phenomena of Functionalized Carbon Nanotubes (CNT)/Cement Composites, B Balasubramaniam, K Mondal, K Ramasamy, GS Palani, Nagesh R. Iyer, Fibers 5 (4), 2017, pp. 1-39

  7. Modelling of RC Beams Strengthened with Basalt Reinforced Concrete, Smitha Gopinath, M. Prabha, A. Ramachandra Murthy, Nagesh R. Iyer, J. Inst. Eng. India Ser. A, DOI 10.1007/s40030-017-0223-1, Feb. 2017, pp. 1-7

  8. Use of basalt fiber reinforced polymer bars in the development of hybrid beam – investigations on the flexural response, Smitha Gopinath*, P Nachiappan, A Ramachandra Murthy & Nagesh R. Iyer, Indian Journal of Engineering & Materials Sciences Vol. 24, April 2017, pp. 153-161

  9. Nutritional Behavior, Morphogenesis Cycle and Sediment Consolidation Capabilities of the Calcareous Bacteria Derived from Coastal Marine Sediments, Sarayu Krishnamoorthy, M Annaselvi, A Ramachandra Murthy, Nagesh R. Iyer, Geomicrobiology Journal, 2017/3/14, pp. 1-9, 2017

  10. Basalt: structural insight as a construction material, S Raj, VR Kumar, BHB Kumar, NR Iyer, Sādhanā 42 (1), 75-84, 2017

  11. Effect of Corrosion Resistance of Rebar subjected to Deep Cryogenic Treatment, Ramesh S., Bhuvaneswari B., Palani G.S., Mohan Lal D. and Nagesh R. Iyer, Jl. Of Mechanical Science and Technology, 31 (1), 2017, pp. 123-132

  12. Finite Element Analysis of RC Beams Strengthened with Textile Reinforced Concrete, Smitha Gopinath, Nagesh R. Iyer, and Ravindra Gettu, Journal of Structural Engg., 43, No. 5, Dec16-Jan17, pp. 454-460

  13. Design of Visco-Elastic Dampers of RC Frame for Site-Specific Earthquake, Kamatchi P., Rama Raju K., Ravisankar K. and Nagesh R. Iyer, Jl. Institution of Engineers (I),: Series A, 97, No. 4, 2016

  14. Advanced Methodologies for Fracture Analysis and Damage Tolerant Evaluation, Nagesh R. Iyer, Palani, G.S. and A. Ramachandra Murthy, Proc. Indian National Science Academy (INSA), Vol. 82, No. 2, pp. 209-222, June 2016

  15. XFEM for Fracture Analysis of Functionally Graded Structures, M.R. Nanda Kumar, Akshay D Mahajan, A. Ramachandramurthy, Smitha Gopinath and Nagesh R. Iyer, Structural of Structural Engineering, Vol. 42, No. 6, pp. 550-564, March 2016

  16. Numerical Evaluation of Deformation Capacity of Laced Steel-Concrete Composite Beams under Monotonic Loading, A. Thirumalaiselvi, A. Anandavalli, J. Rajasankar, and Nagesh R. Iyer, Steel and Composite Structures, Vol. 20, No. 1, pp. 167-184, 2016

  17. Investigations on textile-reinforced concrete as cover for RC beams, Smitha Gopinath, Ramachandra Murthy, Nagesh R. Iyer and Dharinee, Magazine of Concrete Research, Volume 68 Issue 20, October, 2016, pp. 1040-1050

  18. XFEM for Fatigue and Fracture Analysis of Cracked Stiffened Panels, M.R. Nanda Kumar, A. Ramachandramurthy, Smitha Gopinath and Nagesh R. Iyer, Structural Engineering and Mechanics, Vol. 57, No. 1 65-69, 2016

  19. Development of Nano Modified Photocatalyst enabled Cement Composites, Maitri Mapa, A. Ramachandramurthy and Nagesh R. Iyer, The Indian Concrete Journal, Vol. 90, No. 1, 14-22, 2016

  20. Prediction of Long term Compressive Strength of Concrete made with Supplementary Cementitious Material through Regression Analysis, Hemalatha T., Hari Hara Sudhan and Nagesh R. Iyer, The Indian Concrete Journal, Vol. 90, No. 1, 49-58, 2016

  21. Evaluation of Eco-Efficiency and Performance of Retrofit Materials , S Gopinath, ARC Murthy, Nagesh R. Iyer, S Kokila, Journal of The Institution of Engineers (India): Series A 96 (4), 327-337, 2015

  22. Numerical Investigations on a Blast Loaded Laced Reinforced Concrete Structure using an Equivalent Constitutive Property, N Anandavalli, N Lakshmanan, A Prakash, J Rajasankar, Nagesh R. Iyer, Journal of The Institution of Engineers (India): Series A 96 (4), 311-318, 2015

  23. Performance-based Seismic Evaluation of RC Framed Building, A Cinitha, PK Umesha, Nagesh R. Iyer, N Lakshmanan, Journal of The Institution of Engineers (India): Series A 96 (4), 285-294, 2015

  24. The Micro-mechanism Involved and Wollastonite Signature in the Calcareous Precipitates of Marine Isolates, K Sarayu, Nagesh R. Iyer, M Annaselvi, AR Murthy, Applied Biochemistry and Biotechnology, 1-12, 2015

  25. Effect of nanosilica on durability and mechanical properties of high-strength concrete, P Ganesh, A Ramachandra Murthy, S Sundar Kumar, M Mohammed Saffiq Reheman, Nagesh R. Iyer, Magazine of Concrete Research, 1-8, 2015

  26. Condition assessment of a prestressed concrete girder and slab bridge for increased axle loadings, BA Sundaram, S Parivallal, K Kesavan, AKF Ahmed, K Ravisankar, K Ramanjaneyulu, Nagesh R. Iyer,.Journal of Scientific & Industrial Research 74, 634-640, 2015

  27. ‘Effect of high temperature on the properties of ternary blended cement pastes and mortars’, S Maheswaran, Nagesh R. Iyer, G S Palani, R Alagu Pandi, D Divina Dikar and S Kalaiselvam, Magazine of Concrete Research, Volume 121, Number 1, July, 2015.

  28. Fuzzy Similarity Approach for Ranking and Health Assessment of Towers Based on Visual Inspection, M Verma, J Rajasankar, N Anandavalli, A Prakash, Nagesh R. Iyer, Advances in Structural Engineering 18 (9), 1399-1414, 2015

  29. A critical review on enhancing the seismic response of buildings with energy dissipation methods, DS Priya, A Cinitha, PK Umesha, Nagesh R. Iyer, Journal of Structural Engineering 42 (3), 78-88, 2015

  30. ‘Evaluation of Mechanical Properties of Algal Precipitate Incorporated Concrete’, Gnanapoongothai V, Sarayu K, Ramachandra Murthy A, Nagesh R. Iyer and Sakthieswarna N, International Journal of Science and Innovative Engineering & Technology, May 2015 Vol. 2.

  31. Dynamic to static eccentricity ratio for site-specific earthquakes, P Kamatchi, GV Ramana, AK Nagpal, Nagesh R. Iyer, JA Bhat, Earthquakes and Structures 9 (2), 391-413, 2015

  32. Damage Identification Through Wave Propagation and Vibration Based Methodology for an Axial Structural Element, GV Rao, TT Davis, R Sreekala, N Gopalakrishnan, Nagesh R. Iyer, N Lakshmanan, Journal of Vibration Engineering & Technologies 3 (4), 383-399, 2015

  33. Long term studies on FRP strengthened concrete specimens, V Bhashya, SS Kumar, G Ramesh, BH Bharatkumar, TS Krishnamoorthy, Nagesh R Iyer, Indian Journal of Engineering & Materials Sciences 22, 465-472, 2015

  34. ‘Estimation of long-term prestress losses of box-girder bridge span using the prestress loss models in Indian and International codes of practices and comparison with field measurements’, P Kamatchi, B Dhayalini, K Balaji Rao, S Saibabu, S Parivallal, K Ravisankar and Nagesh R. Iyer, The Indian Concrete Journal May 2015

  35. ‘Structural Performance of Precast and Cast-in-situ Ultra High Strength Concrete Sandwich Panel’, A Ramachandra Murthy, V Ramesh Kumar, Smitha Gopinath, Prabhat Ranjan Prem, Nagesh R. Iyer and Reshmi Balakrishnan, Computers, Materials and Continua (CMC), Vol. 44 no.1, pp.59-72,2014

  36. ‘Investigation on micronized biomass silica as a sustainable material’, J Prameetthaa, B H Bharatkumar and Nagesh R. Iyer, J. Prameetthaa, Cement & Concrete Composites 60 (2015) 25-33, April 2015.

  37. “Characterization of micro – and nano – modified cementitious system using micro analytical techniques”, T. Hemalatha, M. Gundavadhi, B. Bhuvaneshwari, Saptarish Sasmal and Nagesh R. Iyer, JI. of Cement and Concrete Composite , Vol. 58.pp.114-128, April. 2015.

  38.  “Fracture analysis and remaining life prediction of aluminum alloy 2014A plate panels with concentric stiffeners under fatigue loading”, A. Ramchandra Murthy, Rakhi Sara Matew, G. S. Palni, Smitha Gopinath and  Nagesh R. Iyer, Jl. of Structural Engineering and Mechanics, Vol. 53 No.4 (2015) 681 -702.

  39.  “Nano mechanical properties on the mineralogical array of calcium hydroxide through molecular dynamics”, B. Bhuvaneshwari, G. S. Palani, R. Karunya and Nagesh R. Iyer, JI. of Current Science , Vol.108. pp. 6, 25th March 2015.

  40. ‘Determination of the back boundary effect on self-compacting concrete beams: bilinear and trilinear approaches’, T Hemalatha, A Ramachandra Murthy and Nagesh R. Iyer, bilinear and trilinear approaches, Int Jl of Fracture, Vol 193(1), 2015, pp. 17-28

  41. “Use of Portland Pozzolana Cement to Enhance the Service Life of Reinforced Concrete Exposed to Chloride Attack”, Bhaskar Sangoju, Radhakrishna G. Pillai, Ravindra Gettu, B.H. Bharatkumar and Nagesh R. Iyer, Jl. of Materials in Civil Engineering, published online – 20th March 2015.

  42. Fracture energy and tension softening relation for nano-modified concrete, AR Murthy, P Ganesh, SS Kumar, Nagesh R. Iyer, Structural Engineering and Mechanics 54 (6), 1201-1216, 2015

  43. Behaviour of reinforced concrete beams strengthened with basalt textile reinforced concrete, S Gopinath, AR Murthy, Nagesh R. Iyer, M Prabha, Journal of Industrial Textiles 44 (6), 924-933, 2015

  44. Electrochemical investigations on the performance of newly synthesized azomethine polyester on rebar corrosion, B Bhuvaneshwari, A Selvaraj, Nagesh R. Iyer, L Ravikumar, Materials and Corrosion 66 (4), 387-395, 2015

  45. ‘Numerical Assessment of step-by-step integration methods in the paradigm of real-time hybrid testing’, Mohit Verma, J Rajasankar and Nagesh R. Iyer, Earthquakes and Structures, Vol8 No.6 (2015) 1325-1348, February 16, 2015.

  46. ‘Pounding influence on adjacent linear elastic structures considering various impact simulation techniques’, K Ravisankar, K Balaji Rao, N Gopalakrishnan, B H Bharatkumar and Nagesh R. Iyer, Journal of Structural Engineering Volume 41 Number 5 December 2014 – January 2015.

  47. “Low – temperature preparation of belite from lime sludge and nanosilica through solid - state reaction”, S. Maheswaran, S. Kalaiselvam, S. Arunbalaji, G. S. Palani and Nagesh R. Iyer, Journal of Thermal Analysis and Calorimetry 119 (3), 1845-1852 2015.

  48.  “ANN-based methodology ot determine dynamic to static eccentricity ratio of torsionally coupled buildings for site-specific  earthquakes”, P. Kamatchi, G. V. Ramana, A. K. Nagpal, Nagesh R. Iyer,  and J.A. Bhat, Jl. of Earthquake Engineering, pp107-136,19,2015.

  49.  ‘Multiscale analysis and mechanical properties of cemnt clinker pahses with molecular dynamics simulations’, B Bhuvaneshwari, G S Palani and Nagesh R. Iyer Journal of Coupled Systems and Multiscale Dynamics, Volume 2, Number 4, December 2014, pp. 214-223(10)

  50. “Flexural Behaviour of Damaged RC Beams Strengthened with Ultra High Performance Concrete”, Prabhat Ranjan Prem, A. Ramachandra Murthy, G. Ramesh, B.H. Bharatkumar and Nagesh R. Iyer,  JI. of Advances in Structural Engineering , pp.2057-2069, December. 2014.

  51. “An Investigation of the Compressive Strength of Cold-Formaed Steel Built uo Channel Sections”, G. Beulah Gnana Ananthi, G. S. Palani and Nagesh R. Iyer, JI. of Advances in Structural Engineering , pp.577-585, December. 2014.

  52. “A Convex Optimization Framework for Hybrid Simulation”, Mohit  Verma, Aikaterini Stefanaki, Mettupalyam V. Sivaselvan, J. Rajasankar and Nagesh R. Iyer, JI. of Advances in Structural Engineering , pp.221-231, December. 2014.

  53. “Blast Response Studies on Laced Steel- Concrete Composite (LSCC) Slabs”, A. Thirumalaiselvi, N. Anandavalli, J. Rajasankar and Nagesh R. Iyer, JI. of Advances in Structural Engineering , pp.331-342, December. 2014.

  54. “Long – Term Prestress Loss and Camber of Box – Girder Bridge”, P. Kamatchi, K. B. Rao, B. Dhayalini, S. Saibabu, S. Parivallal, K. Ravisankar and Nagesh R. Iyer, JI. of Structural Engineering , Vol.111. pp.1297-1306, 2014.

  55. “Carbonization, combustion and biodegradation of agricultural waste as a possible source of silica”, Sarayu Krishnamoorthy, Nagesh R. Iyer and A. Rama Chandra Murthy, Applied Biochemistry and Biotechnology, Part: Enzyme Engineering and Biotechnology, published online – 21st Nov. 2014 (IF=1.687).

  56. “Sustainable concrete – A Nano-and Bio-Technology initiative”, Nagesh R. Iyer, Sarayu Krishnamurthy, S. Maheswaran and S. Sasmal, Nano Digest, pp.31-34, Sept. 2014.

  57. “Constitutive modeling and numerical simulation of FRP confined concrete specimens”, Smitha Gopinath, A. Ramachandra Murthy, Nagesh R. Iyer and E.K. Shaulhameed, Slovak Jl. of Civil Engineering, Vol.22, No.3, pp31-36, 2014.

  58. “Numerical assessment of aerodynamic forces on 2-D L-angle section using CFD”, S. Chitra Ganapathi, P. Harikrishna and Nagesh R. Iyer, J. Wind and Engineering, Vol.11, No.2, pp.27-36, July 2014.

  59. “Functional enhancement of epoxy polymer nanocomposite: A nano blended binder for retrofitting of bridges”, B. Bhuvaneshwari, Saravana Karthikeyan, G. S. Palani, and Nagesh R. Iyer, IOSR Jl. of Mechanical and Civil Engineering, pp36-42, 2014.

  60. “An overview of corrosion and experimental studies on corroded mild steel compression members”, A. Cinitha, P.K. Umesha and Nagesh R. Iyer, JI. of Civil Engineering, Vol.18. pp.1735-1744, June, 2014.

  61. “An Integrated Fracture Mechanics Based Approach for Non-Linear Analysis of Lightly Reinforced Concrete Beams”, Ananthalakshmi K. Iyer, A. Ramachandra Murthy, Smitha Gopinath and Nagesh R. Iyer, JI. of Integrated Fracture Mechanics, Vol.42. pp. 227-244, 2014.

  62. “Pressue measurement studies on a rectangular building model under boundary layer flow condition”, Anila Jayakrishnan, S. Chitra Ganapthi, P. Harikrishna, S. Selvi Rajan, Nagesh R. Iyer and A. S. Santhi, J. Innovating Research and Solution (JIRAS), Vol.1, No.1, 365-375, Jan-June 2014.

  63. “Enhanced model for describing total fatigue rate curve considering stress ratio effects”, Abhishek Kumar, A. Rama Chandra Murthy, and Nagesh R. Iyer, Advances in Structural Engineering, vol.17, No.7, 1011-1027, 2014 (IF=0.49). 

  64. “Prediction of static response of laced steel-concrete composite beam using effective moment of inertia approach”, A.Thirumalaiselvi, N.Anandavalli, J. Rajasankar, Nagesh R. Iyer, IOSR Jl. Mechanical and Civil Engineering, Vol.3,p2320-2334, 2014.

  65. “Exploration on the biotechnological aspect of the Ureolytic bacteria for the production of the cementitious materials – A review”, Sarayu K., Nagesh R. Iyer, and A. Ramachandra Murthy, Applied Biochem, Biotehnol, 172, pp2308-2323, 2014 (IF = 1.893).

  66. “Electrochemical investigations on the performance of newly synthesized azomethine polyester on rebar corrosion”, B.Bhuvaneshwari, A. Selvaraj, Nagesh R. Iyer, and L. Ravikumar, Materials and Corrosion, 2014.

  67. “Behaviour of reinforced concrete beams strengthened with basalt textile reinforced concrete”, Smitha Gopinath, A. Ramachandra Murthy, Nagesh R. Iyer, and M. Prabha, Jl. of Industrial Textiles, Jan. 2014 (IF = 1.38).

  68. “Prediction of fracture characteristics of high strength and ultra high strength concrete beams based on relevance vector machine”, P. Yuvaraj, A. Ramachandra Murthy, Nagesh R. Iyer, Pijush Samui and SK Sekar, Intl. Jl. of Damage Mechancis, Vol.0(0), pp1-26. (IF = 1.747).

  69. “Strength improvement studies using new type wild strain Bacillus cereus on cement mortar”, M. Maheswaran, S. S. Dasuru, A. Rama Chandra Murthy, B. Bhuvaneshwari, V. Ramesh Kumar, G. S. Palani, and Nagesh R. Iyer, Current Science, Vol.106, No.1, Jan. 2014.

  70. “Probabilistic analysis of spectral displacement by NSA and NDA”, P.Devandiran, P.Kamatchi, K.Balaji Rao, K. Ravisankar and Nagesh R.Iyer, Earthquakes and Structures, Vol.5, No.4, pp.439-459, 2013.

  71. “Nano engineering of cementitious materials”, Nagesh R. Iyer Nano Digest, Vol.5, No.2, pp.30-33, Sept. 2013.

  72. “Evaluation of mechanical properties for high strength and ultrahigh strength concretes”, A. Ramachandra Murthy, Nagesh R. Iyer and B.K.Raghu Prasad, Advances in Concrete Construction, Vol. 1, No.4,pp341-358, 2013.

  73. “An improved concrete damage model for impact analysis of concrete structural components by using finite element method”, A. Ramachandra Murthy, G. S.Palani, Smitha Gopinath, V. Ramesh Kumar and Nagesh R. Iyer,  Tech Science Press, Computers, Materials and Continua (CMC), Voo.37, No.2, pp.77-96, 2013 (IF = 0.975).

  74. “Seismic protection of critical infrastructure through innovative technologies” R. Sreekala, N. Gopalakrishnan, K. Muthumani, K. Sathishkumar, G. V. Rama Rao and Nagesh R. Iyer,  Int. Journal of Critical Infrastructures, Vol.9, No.4, 2013,pp.351-367.

  75. “Development of ultra-high-performance geopolymer concrete”, P.S. Ambily, K. Ravisankar, C. Umarani, J.K.Dattatreya and Nagesh R. Iyer, Magazine of Concrete Research (ICE Publishing), pp.1-8, 2013

  76. "Effect of RH on creep of concrete - some studies relevant to Indian conditions", Arun Balu, K. Balaji Rao, M.B. Anoop, P. Kamatchi and Nagesh R. Iyer, Journal of structural Engineering, Vol. 39, No. 6, 2013, pp. 609-619.

  77. “Modelling of strains in reinforced concrete flexural members using alpha-stable distribution”, K. Balaji Rao, M.B. Anoop, K. Kesavan, S.R. Balasubramanian, K. Ravisankar and Nagesh R. Iyer, Computers and Concrete, Vol.11, No.5, 2013, pp. 411-440 Techno press. (IF = 0.936)

  78. “Methodology for deriving multi-hazard factors for design base shear of buildings for wind and earthquake hazard for Peninsular India”, S. Arunachalam, P. Kamatchi, K. Rama Raju, M. N. Anoop, K. Balaji Rao, P. Harikrishna and Nagesh R. Iyer, Journal of Structural Engineering, Vol.40, No. 4, 2013, pp.321-331.

  79. “Nano engineering of cementitious materials”, Nagesh R. Iyer, Nano Digest, Vol.5, No.2, Sept.2013.

  80. “Multivariate adaptive regression splines model to predict fracture characteristics of high strength and ultra-high strength concrete beams”, P. Yuvaraj, A. Rama Chandra Murthy, Nagesh R. Iyer,  Pijush Samui and S. K. Sekar, Tech Science Press, Computers, Materials and Continua (CMC), Vo.36, No.1, 2013, pp.73-97.(IF=0.724)

  81. “Prediction fo critical stess intensity factor for high strength and ultra high strength concrete beams using support vector regression”, P. Yuvaraj, A. Rama Chandra Murthy, Nagesh R. Iyer,  Pijush Samui and S. K. Sekar, Journal Structural Engineering, Vol.40, No.3, Aug-Sep 2013, pp.245-253.

  82. “Low and high velocity impact studies on fabric reinforced concrete panels”, Smitha Gopinath, C. K. Madheswaran, Rama Chandra Murthy A., Nagesh R. Iyer, and T. Barkavi, Intl. Jl. of Computer Modelling in Engineering and Sciences: CMES, Tech. Science Press, Vol.92, No.2, 2013, pp.151-172 (IF=0.849).

  83. “Experimental investigations on the glass fabrics for confinement of concrete specimens”, Smitha Gopinath, Rama Chandra Murthy A., and Nagesh R. Iyer, Intl. Jl. of Structural Durability & Health Monitoring, Tech Science Press, Vol.9, No.1, 2013, pp.1-20.

  84. “Estimation of fracture properties for high strength and ultra high strength concrete beams and size effect”, A. Rama Chandra Murthy, B.K. Raghu Prasad and Nagesh R. Iyer, Int. Jl. of Damage Mechanics, May 2013, Vol.22, No.8, pp.1109 -1126. (IF=1.747)

  85. “Bilinear tension softening diagrams of concrete mixes corresponding to their size-independent specific fracture energy”, A. Rama Chandra Murthy, B.L. Karihaloo, Nagesh R. Iyer and B.K. Raghu Prasad, Construction and Building Materials, Vol.47, 2013, pp.1160-1166. (IF=2.293)

  86. “Determination of size-independent specific fracture energy of concrete mixes by the tri-linear model”, Karihaloo B.L., A. Rama Chandra Murthy, and Nagesh R. Iyer, Cement and Concrete Research, Vol.49, 2013, pp.82-88. (IF=3.112)

  87. “Determination of size-independent specific fracture energy of concrete mixes by two methods”, Rama Chandra Murthy A., Karihaloo B.L., Nagesh R. Iyer, and B.K. Raghu Prasad, Cement and Concrete Research, Vol.50, 2013, pp.19-25. (IF=3.112)

  88. “Forensic applications including mapping and classification of tsunami sand deposits and sand dunes with ground penetrating radar”, Nagesh R. Iyer, P. Srinivasan and Rajesh R. Nair, Intl. Jl. of Forensic Engineering, Vol.1, No.3/4, 2013, pp. 290-300. (IF = 2.307)

  89. “A simple analytical model for evaluation of penetration depth and resistant strength of concrete targets”, A. Rama Chandra Murthy, G. S. Palani, and Nagesh R. Iyer, Intl. Jl. of Structural Stability and Dynamics, Vol.13, No.3, 2013, pp. 1250061-1-1250061-17. (IF= 0.675)

  90. “An overview on the influence of nano silica in concrete and a research initiative”, S. Maheswaran, B. Bhuvaneswhari, G. S. Palani, Nagesh R. Iyer, and S. Kalaiselvam, Research Journal of Recent Sciences, Vol.2 (ISC-2012), 2013, pp.17-24.

  91. “Application of Chebyshev-and Markov-Type inequalitities in structural engineering”, K. Balaji Rao, M.B.Anoop, and Nagesh R. Iyer, Reliability: Theory & Applications, Vol.8, No.01,(28), 2013, pp.100-110.

  92. “An Integrated model for tension stiffening and reinforcement corrosion of RC flexural members”, Smitha Gopinath, J. Rajasankar, Nagesh R. Iyer, and A. Rama Chandra Murthy, Computers, Materials and Continua (CMC), Vol.3, No.1, 2013, pp.87-110. (IF= 0.972)

  93. “Experimental evaluation of aerodynamic parameters for a cooling tower model”, S.Selvi Rajan, G. Ramesh Babau, S. Chitra Ganapathi, S. Arunachalam, P. Harikrishna, A. Abraham and Nagesh R. Iyer” , Jl. of Wind and Engineering, Vol.10, No.1, Jan. 2013, pp.24-36.

  94. “Evaluation of thickness and defects in concrete using impact-echo technique”, Bhaskar Sangoju, P.Srinivasan, S.G.N.Murthy, Nagesh R. Iyer, and K. Ravisankar, The Indian Concrete Journal, Vol.87, No.1, Jan.2013, pp.19-26.

  95. “Influence of adhesive thickness on high velocity impact performance of ceramic/metal composite targets”, Amar Praksh, J. Rajasankar, N. Anandavalli, Mohit Verma and Nagesh R. Iyer, International Jl. of Adhesion & Adhesives, Vol.41, 2013, p.186-197. (IF =2.17)

  96. “Support Vector Regression based Models to predict Facture Characteristics of High Strength and Ultra High Strength Concrete Beams”, P. Yuvaraj, A. Rama Chandra Murthy, Nagesh R.Iyer,  S. K. Sekar and Pijush Samui, Engineering Fracture Mechanics, Vol.98, 2013, pp.29-43. (IF = 1.353)

  97. “Seismic retrofitting of damaged exterior beam-column joints using FRP composite-steel plate combined technique”,Saptarshi Sasmal,  Ramanjaneyulu, K., Balthasar Novák, Srinivas, V., Constanze Roehm, Lakshmanan N., and Nagesh R. Iyer, Structure and Infrastructure Engineering, Vol. 9., No.2, 2013, pp.116-129. (IF= 0.966)

  98. “Performance Evaluation of Dry and Epoxy Jointed Segmental Prestressed Box Girders Under Monotonic and Cyclic Loading”, S. Saibabu, V. Srinivas, Saptarshi Sasmal, N. Lakshmanan and Nagesh R. Iyer, Construction and Building Materials, Vol.38, 2013, pp.931-940. (IF=2.293)

  99. “Fatigue crack growth study and remaining life assessment of high strength concrete beams”, A. Rama Chandar Murthy, Nagesh R. Iyer, and Raghu Prasad, CMEs: Computer Modeling in Engineering & Sciences, Tech. Science Press, Vol.89, No.6, 2012, pp459-480. (IF=1.123)

  100. “Stress intensity factors for plates with collinear and non-aligned straight cracks”, M. Surendran, G. S. Palani, and Nagesh R. Iyer, World Academy of Science, Engineering and Technology, 70, 2012, pp.1173-1182.

  101. “Probabilistic analysis of creep of cement paste at nanogranular level”, Susan Jacob, Anoop, M.B., Balaji Rao, K., Babu Kurian and Nagesh R. Iyer, Journal of Structural Engineering, Vol.39, No. 5, December 2012 -January 2013, pp. 522-528.

  102. “Evaluation of Fracture Parameters by Double-G, Double-K, Models and Crack Extension Resistance for High Strength and Ultra Strength Concrete Beams”, A. Rama Chandra Murthy, Nagesh R.Iyer, and B.K. Raghu Prasad, Computers, Materials and Continua (CMC), Vol.31, No.3, 2012, pp.229-251. (IF=0.972)

  103. ‘Newmark implicit time integral for application in pseudo-dynamic testing - Experimental verification’,Sathish Kumar, K., Muthumani, K., Antony Jeyasehar, C. and Nagesh R. Iyer,AsianJournal of Civil Engineering (Building and Housing), Vol. 13, No. 6, Dec. 2012, pp.805-820.

  104. “Neural network-based methodology for inter-arrival times of earthquakes”, Kamatchi, P., Balaji Rao, K., Nagesh R. Iyer and Arunachalam, S., Natural Hazards, Vol. 64, 2012, pp. 1291-1303. (IF=1.529)

  105. “Management and Maintenance Scheduling of Infrastructural Facilities - A Road Map”, Lakshmanan, N., Ravisankar, K., Muthumani, K., Krishnamoorthy, T.S., Ramanjaneyulu, K., Gopalakrishnan, N. and Nagesh R. Iyer, ASCE Journal of Performance of Constructed Facilities, Vol. 26, No. 6, Dec. 2012, pp. 835-848 (IF=0.45).

  106. “Impact failure analysis of reinforced concrete structural components by using finite element method” , A. Rama Chandra Murthy, G. S. Palani, Nagesh R. Iyer,  Smitha Gopinath, and  V. Ramesh Kumar, Intl. J. on Computer Modelling in Engineering & Sciences, Tech Science Press, Vol. 86, No.5, 2012, pp.409-434. (IF=1.123)

  107. “Experimental Investigation of Reinforced Concrete Beams with and Without CFRP Wrapping”, K.V. Venkatesha, K. Balaji Rao, S. V. Dinesh, B.H.Bharatkumar,, M.B. Anoop, Balasubramanian S.R., and Nagesh R. Iyer, Slovak Jl. Of Civil Engineering, Vol. XX, No.3, 2012, pp15-26.

  108. “Fracture Analysis of High Strength and Ultra High Strength Concrete Beams by Using Finite Element Method”, A. Rama Chandra Murthy, Nagesh R. Iyer and B.K. Raghu Prasad, Computers, Materials and Continua (CMC), Vol.30, No.2, 2012, pp.177-194 (IF-0.972).

  109. “A Simple Technique to Determine Interface Slip of Stud Connected SCC Girders”, Prakash A, Lakshmanan N, Anandavalli N, Madheswaran C.K, Nagesh R. Iyer and Rajasankar J, Journal of Civil Engineering Dimension, Vol.14 No.2, Sept. 2012, pp.110-120.

  110. “Experimental and Numerical Investigation on in-plane behavior of Hollow Concrete Block Masonry Panels”, Rama Chandra Murthy A, Chitra Ganapathi S, Nagesh R.Iyer, Lakshmanan N, Computers & Concrete, Vol.10,July 2012, No.1, pp.1-18 (IF-1.015).

  111. “Sediment Characteristics of Tidal Deposits at Mandvi, Gulf of Kutch, Gujarat, India: Geophysical, Textural and Mineralogical Attributes”, Deshraj Trivedi, Mani Christey Raicy, Koravangatt Devi, Devender Kumar, Ilya Buynevich, P.Srinivasan, Nagesh R. Iyer, R.Guin, D.Sengupta, Rajesh R.Nair, International Journal of Geosciences, 3, July 2012, pp.515-524.

  112. “Seismic Performance of Polymer Modified Concrete in Flexure – Modeling”, Sreekala, R., Muthumani, K., Gopalakrishnan, N., Sathish Kumar K., Rama Rao, G.V., and Nagesh R. Iyer,International Journal of Structural Engineering, Vol.3, No.4, 2012, pp.298-310.

  113. “Role of Nano Oxides for Improving Cementitious Building Materials”, Bhuvaneshwari B, Saptarshi Sasmal, Baskaran, T, Nagesh R. Iyer, Journal of Civil Engineering and Science, Vol 1, No.2, June 2012, pp.52-58.

  114. “Newmark Implicit Time Integral for Application in Pseudo-Dynamic Testing-Experimental Verification”, Sathish Kumar, K., Muthumani, K., Antony Jeyasehar and Nagesh R. Iyer, Asian Journal of Civil Engineering (AJCE) Building and Housing, Vol.13 No.6, 2012, pp.805-820.

  115. “Predictor-Corrector Algorithm for Pseudo-Dynamic Testing towards Seismic Performance Evaluation of Structures”, Sathish Kumar, K., Antony Jeyasehar, C., K. Muthumani and Nagesh R. Iyer, Journal of Structural Engineering, Vol.39, No. 1, April - May 2012, pp.102-106.

  116. “Experimental study on behaviour of segmental joints”, Saibabu, S., Jayaraman, R., Lakshmanan, N. and Nagesh R. Iyer, Journal of Structural Engineering, CSIR-SERC, Vol. 39, No 1, April - May 2012, pp 84-89.

  117. “Numerical analysis of cold-formed steel open sections under axial compression”, Beulah Gnana Ananthi, G., Samuel Knight, G.M., and Nagesh R. Iyer,Journal of Structural Engineering, CSIR-SERC, Vol. 39, No 1, April - May 2012, pp 1-8.

  118. “Effect of Bolt Slip on Tower Deformation”, Napa Prasad Rao, Samuel Knight, G.M., Lakshmanan, N. and Nagesh R. Iyer, Practice Periodical on Structural Design and Construction, ASCE, Vol.17, No.2, May 2012, pp.65-73.

  119. “Seismic performance evaluation of existing RC buildings designed as per past codes of practice”, Rama Raju K., Cinitha A., and Nagesh R. Iyer, Sadhana, Vol.37, Part 2, April 2012, pp281-297. (IF- 0.393)

  120. “Performance of laced steel-concrete composite (LSCC) beams under monotonic loading”, Anandavalli N., Lakshmanan N., Samuel G. M., Nagesh R. Iyer, and Rajasankar J., Engineering Structures, Vol.41, 2012, pp177-185 (IF-1.363).

  121. “Confinement effect of woven roving glass fabric on concrete specimen”, Smitha Gopinath, Rama Chandra Murthy A., Bhaskar Srivastava, Ramesh Kumar V., and Nagesh R. Iyer,  Intl. Jl. Computers Materials  and Continua, Vol.27,1,2012,     73-99.(IF-0.972)

  122. “Nonlinear statice analysis to assess seismic performance and vulnerability of code – conforming RC buildings”, Cinitha A., Umesha P.K. Umesha, Nagesh R. Iyer, WEAS Transactions on Applied and Theoretical Mechanics, Vol.7, 1, 2012, pp39-48.

  123. “Nonlinear analysis of RC shell structures using multilevel modeling techniques” Smitha Gopinath, Nagesh R. Iyer, Rajasankar, J. and Sandra D’Souza, Engineering Computations Intl. Jl. for Computer Aided Engineering and Software, Vol. 29, 2, 2012, pp104-124. (IF-1.214).

  124. “Confinement effect of glass fabrics bonded with cementitious and oranic binders”, Smitha Gopinath, Nagesh R. Iyer, Ravindra Gettu, G. S. Palani, and A. Rama Chandra Murthy, Procedia Engineering, Vol.14, 2011, 535-542.

  125. “Optimised mix design for normal strength and high performance concrete using particle packing method” Smitha Gopinath, A. Rama Chandra Murthy, and Nagesh R. Iyer, Open Access Jl. Archives of Civil Engineering, LVII, 4, 2011, pp357-371.

  126. “Studies on lime sludge for partial replacementof cement”, S. Maheswaran, V. Ramesh Kumar, B. Bhuvaneshwari, G. S. Palani and Nagesh R. Iyer, Applied Mechanics and Materials, Vol.71-78,2011, pp1015-1019.

  127. Experimental studies on useof toggle brace mechanism fitted with magnetorheological dampers for seismic performance enhancement of three-storey steel moment-resisting frame model”, Rama Raju K., Meher Prasad A., Muthumani K., Gopalakrishnan N., Nagesh R. Iyer, Lakshmanan N., Structural Control and Health Monitoring, 2011.

  128. “Experimental and analytical studies on concrete cylinders wrapped with fiber reinforced polymer”, V. Bhashya, G. Ramesh, S. Sundar Kumar, B.H.Bharatkumar, T.S.Krishnamoorthy, and Nagesh R. Iyer, Tech Science Press, Computers, Materials and Continua (CMC), Vol.25, 1, 2011, pp47-73.(IF-0.972)

  129. “Fracture mechanics based model for fatigue remaining life prediction of RC beams considering corrosion effects”, A. Rama Chandra Murthy, Smitha Gopinath, Ashish Shrivastav, G. S. Palani, and Nagesh R. Iyer, Tech Science Press, Computers, Materials and Continua (CMC), Vol.25, 1, 2011, pp1-17. (IF-0.972)

  130. “A Novel Modelling Technique for Blast Analysis of Steel-Concrete Composit Panels”, N. Anandavalli, N. Lakshmanan, Nagesh R. Iyer, G. M. Samuel Knight and J. Rajasankar, Procedia Engineering, Vol.14, 2011, pp2429-2437.

  131. “Methodology for vulnerability assessment of built-environment subjected to earthquakes”, P. Kamatchi, K. Balaji Rao, S. Arunachalam, and Nagesh R. Iyer, Intl. Jl. of Earth Sciences and Engineering, Vol.04, 06 Spl, Oct. 2011, pp183-188.

  132. "Classification of soil sites and response spectra for chennai city", P. Kamatchi, K. Balaji Rao, M.B. Anoop and Nagesh R Iyer, Journal of structural Engineering, Vol. 37, No. 6, 2011, pp.348-388.

  133. “An overview of techniques based on biomimetics for sustainable development of concrete”, V. Ramesh Kumar, B. Bhuvaneshwari, S. Maheswaran, G. S. Palani, K. Ravisankar and Nagesh R. Iyer, Current Science, Vol.101, 6, Sep. 2011, pp741-747, (IF-0.897).

  134. “Nonlinear analysis of RC structures using isotropic damagemodel”, Smitha Gopinath, J. Rajasankar and Nagesh R. Iyer, Intl. Jl. of Damage Mechanics, 2011, pp1-23. (IF-1.958)

  135. “A critical review on earthquake resistant design provisions of SNI 03-1726-2002 of Indonesia and IS 1893 (Part 1)-2002 of India”, Luna Ngeljaratan, P. Kamatchi and Nagesh R. Iyer , Jl. of Structural Engineering, Vol.38, 3, Aug. – Sep. 2011.

  136. “Development of upgradation schemes for gravity load designed beam-column sub-assemblage under cyclic loading”, Saptarshi Sasmal, N. Lakshmanan, K. Ramanjaneyulu, Nagesh R. Iyer, Balthasar Novak, V. Srinivas, K. Saravana Kumar and Constanze Roehm, Construction and Building Materials, Vol.25, 8, Aug. 2011, 3625-3638. (IF-1.834)

  137. “Experimental and Numerical Study on In-Plane Behavior of Brick Masonry Wall Panels”, S. C. Ganapathi, A. R. C. Murthy, Nagesh R. Iyer, N. Lakshmanan and N.G. Bhagavan, Intl. Jl. of Structural Stability and Dynamics, Vol.11, June 2011, 3. Pp. 431-450. (IF-0.45)

  138. “Upgradation of gravity load designed sub-assemblages subjected to seismic type loading”, Saptarshi Sasmal, Balthasar Novak, K. Ramanjaneyulu, Constanze Roehm, V. Srinivas, N.Lakshmanan, and Nagsh R. Iyer, Composite Structures, Vol.93, 93, 6, May 2011, 1561-1573. (IF-2.24)

  139. “Seismic retrofitting of nonductile beam-column sub-assemblage using FRP wrapping and steel plate jacketing “, Saptarshi Sasmal, K. Ramanjaneyulu, Balthsar Novak, V. Srinivas, K. Saravana Kumar, Christian Korkowaski, Constanze Roehm, N. Lakshmanan and Nagesh R. Iyer, Construction and Building Materials, Vol.25, 1, Jan. 2011, 175-182. (IF-1.834)

  140. “Seismic Design of Buildings with Viscous Fluid Dampers” - A Methodology, K. Rama Raju, G.G. Hemanth, K. S. Rekha and Nagesh R. Iyer, Institution of Engineers (India) Jl. CV, Vol.92, May 2011, 44-54.

  141. “Bio-inspired and Bio-mimetic materials – an overview”, B.Bhuvaneshwari, G.S.Palani, Nagesh R. Iyer, Jl of Structural Engineering, Vol.38, No.1, 2011, pp.36-45.

  142. “Failure Analysis of Transmission Line Towers”, N. Prasada Rao, G. M. Samuel Knight, S. Seetharaman, N. Lakshmanan and NageshR. Iyer, Jl. of Structural Engineering, 38, 1, April – May 2011.

  143. “Nonlinear Finite Element Analysis of RC Structures Incorporating Corrosion Effects”, Smitha Gopinath, Rama Chandra Murthy, A and Nagesh R. Iyer, Computers, Materials & Continua, 22, 1, 2011, 55-71. (IF-0.972)

  144.  “Structural grade concrete using mineral admixtures”, Nagesh R. Iyer, Bharathkumar B. H., and Krishnamoorthy T.S., Consulting Ahead (Jl. of CDC), 5, 1, Jan. 2011, 1-10.

  145. “Object-oriented programming paradigm for damage tolerant evaluation of engineering structural components”, Rama Chandra Murthy A., Palani G. S., and Nagesh R. Iyer, Advances in Engineering Software, 42, 2011, 12-24. (IF-1.185)

  146. “Fracture Analysis of Concrete Structural Components Accounting for Tension Softening Effect”, Rama Chandra Murthy A., Palani G. S., Nagesh R. Iyer, Raghu Prasad B.K., Srinivasa Pavan M., and Smitha Gopinath, Computers, Materials & Continua, 19, 2, 2010, 135-154. (IF-1.36)

  147. “Effect of depth of soil stratum on performance of buildings for site-specific earthquakes”, Kamatchi P., Rajasankar J., Nagesh R. Iyer, Lakshmanan N., Ramana G. V., and Nagpal A. K., Soil Dynamis and Earthquake Engineering, 30, 2010, 647-661. (IF- 1.01)

  148. “Damage tolerance evaluation of cracked tubular joints subjected to fatigue loading”, Rama Chandra Murthy A., Palani G. S., and Nagesh R. Iyer, Key Engineering Materials, Vol.452-453, 2010, 653-656.

  149. “Fracture analysis and fatigue remaining life prediction of concrete structural components accounting for tension softening and size effects” Rama Chandra Murthy A., Palani G. S., and Nagesh R. Iyer, Key Engineering Materials, Vol.452-453, 2010, 649-652.

  150. “A short note onestimation of occurrence of earthquakes in Tamil Nadu region”, Priya T., Balaji Rao K., Anoop M.B., Balasubramanian S. R., and Nagesh R. Iyer, Jl. of Structural Engineering, Vol.37, No.2, June-July 2010,142-144.

  151. “Innovative construction materials for sustainable development based on biomimetics”, Ramesh Kumar V., Maheswaran S., Palani G.S., Ravisankar K., and Nagesh R. Iyer, Jl. of Indian Buildings Congress, Vol.XVII, No.2 June 2010, 1-7.

  152. “Time-dependent modeling of RC structures using nonlinear finite element analysis”, Ayan Haldar, Smitha Gopinath, Palani G. S., and Nagesh R. Iyer, Intl. Jl. of Earth Sciences and Engineering, Vol.03, No.03, Spl. Issue, May 2010, 286-293.

  153. “Impact analysis of concrete structural components”, Rama Chandra Murthy A., Palani G. S., and Nagesh R. Iyer, “Defence Science Journal”, Vol.60, No.3, May 2010, 307-319.

  154. “Investigation of transmission line tower failures”, Prasad Rao N., Samuel Knight G.M., Lakshmanan N., and Nagesh R. Iyer, “Engineering Failure Analysis, Vol.17, 5, 2010, 1127-1141. (IF-0.765)

  155. “Change point detection in corrosion health monitoring using statistical techniques”, Anoop M.B., Balaji Rao K., Raghuprasad B.K., Ravisankar K., and Nagesh R. Iyer, “Journal of Structural Engineering”, Vol.37, No.1, Apr-May 2010, 66 – 74.

  156. “Estimation of de-passivation period for steel in concrete based on chloride diffusion tests”, Prabhakar J., Devadas Manoharan P., Neelamegam M. and Nagesh R. Iyer, “Journal of Structural Engineering”, Vol.37, No.1, Apr-May 2010, 8 – 16.

  157.  “Effect of creep, shrinkage and cracking on time dependent behaviour of RC structures”, Ayan Haldar, Smitha Gopinath, Palani G.S., and Nagesh R. Iyer “Journal of Structural Engineering”, Vol.36, No.6, Feb. Mar. 2010, 19-24.

  158. " A critique on the use of quality factors for developing attenuation relations for the regions in India", J. Daniel Ronald Joseph, K. Balaji Rao, M.B. Anoop and Nagesh R Iyer, Journal of structural Engineering, Vol.36, No.6, 2010, pp.456-460.

  159. "District-wise first order seismic loss estimation to the brick masonry buildings, in the states: Uttar Pradesh, Uttarakhand, Punjab and Tamil Nadu", S.R. Balasubramanian, K. Balaji Rao, P. Vasuki, M.B. Anoop, J. Daniel Ronald Joseph and Nagesh R Iyer, Journal of structural Engineering, Vol.36, No.6, 2010, pp.429-432

  160. “Development of capacity curve for a typical two-storey reinforced brick masonry building”, Balasubramanian S. R., Balaji Rao K., Anoop M.B., Joseph J.D. R. and Nagesh R. Iyer, “Journal of The Institution of Engineers (India)”, Vol.90, Feb. 18, 2010.

  161. "Occurrence of earthquakes in South India - a Bayesian approach", T. Priya, K. Balaji Rao, M.B. Anoop, S.R. Balasubramanian, J. Thanga pandi, P.Vasuki and Nagesh R Iyer, Journal of structural Engineering, Vol. 37, No.3, 2010, pp.163-166.

  162. "A short note on estimation of occurrence of earthquakes in Tamil Nadu region", T. Priya, K. Balaji Rao, M.B. Anoop, S.R. Balasubramanian and Nagesh R Iyer, Journal of structural Engineering, Vol. 37, No.2, 2010, pp.142-144

  163. “Quasi-static analysis of reinforced concrete frame structures using a continuum damage mechanics based model” Rajasankar J., Nagesh R. Iyer and Meher Prasad A, “Journal of Structural Engineering”, Vol.36, No.5, Dec 2009 – Jan. 2010.

  164. “Estimation of enhanced design base shear requirement for RC buildings designedas per IS:1893-1966, 1984 by seismic coefficient method”, Journal of Structural Engineering, Rama Raju K., Cinitha A., Kamatchi P., Nagesh R. Iyer, and Lakshmanan N., Vol.36, No.4, Oct-Nov. 2009, 292-297.

  165. “Residual strength evaluation of unstiffened and stiffened panels under fatigue loading”, Rama Chandra Murthy A., Palani G. S., and Nagesh R. Iyer, “Structural Durability and Health Monitoring”, Vol.5, No.3, 2009, 201-226. 

  166. “Modelling inelastic hinges using CDM for nonlinear analysis of reinforced concrete frame structures”, Rajasankar J., and Nagesh R. Iyer, Computers and Concrete, 6, 4, 2009, 319-341. (IF- 0.441).

  167. “State-of-the-art review on fracture analysis of concrete structural components”, Rama Chandra Murthy, A, Palani, G.S, and Nagesh R. Iyer, Sadhana, 34, Part 2, April 2009, 345-367. (IF-0.196)

  168. “Remaining life prediction of concrete structural components accounting for tension softening and size effects under fatigue loading”, Rama Chandra Murthy, A, Palani, G.S, and Nagesh R. Iyer,Structural Engineering & Mechanics, 32, 3, 2009, 459-475.

  169. “Reliable Mathematical Modelling for Design of Engineering Structures – Some New and Novel Methodologies” Nagesh R. Iyer, Annals of the Indian National Academy of Engineering, Vol.VI, April 2009, 81-91.

  170. “Evaluation of concrete penetration depth under impact loading employing empirical formulate”, Rama Chandra Murthy A., Palani G. S., Nagesh R. Iyer, Structural Durability and Health Monitoring, Vol.4, NO.4, 2008, 221-229.

  171. “A generated technique for fracture analysis of 2-D crack problems employing singular finite elements”, G.S. Palani, B. Dattaguru and Nagesh R. Iyer, Structural Durability and Health Monitoring, 4, 2, 2008, 77-93.

  172. “A methodology for remaining life prediction of concrete structural components accounting for tension softening effect” Rama Chandra Murthy, G. S. Palani, Nagesh R. Iyer and Smitha Gopinath, Computers and Concrete, Vol.5, No.3, 2008, 261-277. (IF- 0.351)

  173. “Advances analysis of engineering structures using finite element adaptive refinement software – Part II” Nagesh R. Iyer, Civil Engineering & Construction Review, April 2008, 78-84.

  174. “Advances analysis of engineering structures using finite element adaptive refinement software – Part I” Nagesh R. Iyer, Civil Engineering & Construction Review, March 2008, 16-22.

  175. “Probabilistic modelling of fatigue crack initiation from pits andpit clusters in aluminium alloys”, J. Rajasankar, Nagesh R. Iyer, Smitha Gopinath, Corrosion Engg., Science & Technology, Vol.42, No.3, 2007, 260-265.

  176. “SSI analysis of a massive concrete structure based on a novel convolution/deconvolution technique” J. Rajasankar, Nagesh R. Iyer, B. Yerrayaswamy, N. Gopalakrishnan and P. Chellapandi, Sadhana, Vol.32, June 2007, 215-234. (IF-0.276)

  177. “Remaining life prediction of cracked stiffened panels under constant and variable amplitude loading”, A. Rama Chandra Murthy, G.S. Palani and Nagesh R. Iyer, Intl. Jl. Fatigue, Vol.29, 2007, 1125-1139.

  178. “A generalised technique for fracture analysis of cracked plates under combined tensile, bending and shear loads”, G.S. Palani, Nagesh R. Iyer and B. Dattaguru, Jl. Computers & Structures, Vol.84, 2006, 2050-2064.

  179. “A Probability-based model for growth of corrosion pits in aluminium alloys”, Rajasankar J. and Nagesh R Iyer, Engineering Fracture Mechanics Journal, vol.73, 2006, 553-570.

  180. “New a posteriori error estimator and adaptive mesh refinement strategy for 2-D crack problems, Palani G. S., Nagesh R. Iyer and Dattaguru B., Intl. Jl. Engg. Fracture Mech, Vol.73, 2006, 802-819.

  181. “An improved wheeler model for remaining life prediction of cracked plate panels under tensile-compressive overloading”, Rama Chandra Murthy A., Palani G.S., and Nagesh R. Iyer, Intl. Jl. Structural Integrity & Durability, Vol. 1, No.3, 2005, 203-213.

  182. “Reliable fracture analysis of 2-D crack problems using NI-MVCCI technique”, Palani, G.S., Nagesh R. Iyer, and Dattaguru B., Structural Integrity and Durability, Vol.1, No.2, 2005, 107-120.

  183. “Damage tolerance evaluation of wing bottom skin panel of an aircraft”, Nagesh R. Iyer, Rama Chandra Murthy A. Rajasankar J. and Palani G. S., Journal of Aerospace Sciences and Technologies Vol.57, No.4, Nov. 2005, 408-420.

  184. “Fracture analysis of cracked stiffened panels under tensile, bending and shear loads”, Palani, G.S., Nagesh R. Iyer, and Dattaguru B., American Institute of Aeronautics and Astronautics Journal, Vol.43(9), 2005, 2039 – 2051.

  185. “Fracture mechanics based analytical prediction of remaining life of tubular T- and Y- joints”, Rama Chandra Murthy, A., Palani G.S. and Nagesh R. Iyer, Intl. Jl. Engg. Maritime Environment, Vol.219, No.1, 2005, 1-10.

  186. “Fracture Mechanics based remaining life prediction software”, Rama Chandra Murthy, A., Palani G.S.and Nagesh R. Iyer, Special Issue of Trans. Indian Institute of Metals, Trans. Indian Institute of Metals, Intl Jl Minerals, Metals &Materials Engg., 58(2-3), April-June 2005, 405-412.

  187. “Fracture analysis of cracked plates panels using NI-MVCCI technique”, Palani, G.S., Nagesh R. Iyer and. Dattaguru B., Trans. Indian Institute of Metals, Intl Jl Minerals, Metals & Materials Engg., 58(2-3), April-June 2005, 437-444.

  188. “Cumulative damage function model for prediction of uniform corrosion rate of metals in atmospheric environment”, S. Bhaskar, Nagesh R. Iyer and J. Rajasankar, Intl. Jl. Corrosion Engineering, Science and Technology, Vol. 39, No. 4. 2004, 313-320.

  189. “An efficient FE modeling strategy for fracture analysis of tubular joints”, Ramachandra Murthy, G.S. Palani, Nagesh R. Iyer and T.V.S.R. Appa Rao, Jl. Instl. Engineers (India), Civil Engg. Div., 85, 2004, 17-25.

  190. “State-of-the-art review on fatigue crack growth analysis under variable amplitude loading”, A. Rama Chandra Murthy, G. S. Palani and Nagesh R. Iyer, Jl. of Institution of Engineers (I), Civil Engineering Division, Vol. 85, Aug. 2004, 118-129.

  191. “An improved wheeler residual stress model for remaining life assessment of cracked plate panels”, Rama Chandra Murthy, A., G.S. Palaniand Nagesh R. Iyer, Int. Jl. Computers, Materials and Continua, Vol. 1, 2004, 289-300.

  192. “Numerically Integrated Modified Virtual Crack Closure Integral technique for 2-D crack problems”, Palani, G.S., B. Dattaguru and Nagesh R. Iyer, Intl. Jl. Struct. Engg. Mech., 18, 2004, 731-744.

  193. “A posteriori error estimation and h-adaptive refinement techniques for transient dynamic analysis of stiffened plate/shell panels”, G.S. Palani, Nagesh R. Iyer and T.V.S.R. Appa Rao, International Journal of Structural Stability and Dynamics, Vol. 4, 2, June 2004, 259-277.

  194. “An efficient FE modelling strategy for fracture analysis of tubular joints”, A.R.C. Murthy, G.S. Palani, Nagesh R. Iyer and T.V.S.R. Appa Rao, Jl. of Institution of Engineers(I), Civil Engg. Division, Vol. 85, May 2004, 17-25.

  195. “Software Development Activities at the Structural Engineering Research Centre – Capabilities & Contributions”, Nagesh R. Iyer, Civil Engineering & Construction Review, March 2004, Vol. 17, No.3, 26-34.

  196. ‘Reliable finite element analysis of ship structural components’, G.S. Palani, J. Rajasankar, Nagesh R. Iyer and T.V.S.R. Appa Rao, Proc. Inst. Mech Engrs, Vol. 217, Part M: Jl. of Engineering for the Maritime Environment, 2003, 159-171.

  197. “Structural Integrity Assessment of Offshore Tubular Joints Based on Reliability Analysis”, J. Rajasankar, Nagesh R. Iyer and T.V.S.R. Appa Rao, Intl. Jl. of Fatigue, 25, July, 2003, 609-619.

  198. “Influence of mass representation schemes on vibration characteristics of structures”, Nagesh R. Iyer, G.S. Palani, and T.V.S.R. Appa Rao, Jl. of Institution of Engineers(I), Aerospace Division, Vol. 84, May 2003, 19-26.

  199. “Multigrid Solver in Adaptive Finite Element Solution”, B. Geetha, Nagesh R. Iyer and T V S R Appa Rao, Journal of Structural Engineering, Vol. 29, No. 4, Jan-Mar 2003, 239-243.

  200. “A posteriori Error Estimator and h-adaptive Refinement Strategy for Vibration Analysis of Structures”, Nagesh R. Iyer, and T V S R Appa Rao, Jl. of Structural Engineering, Vol.29, No.2 July-Sep 2002, 109-118.

  201. “Integrated Approach Towards Use of Computers and IT for Construction”, Nagesh R. Iyer (Invited paper), The Indian Concrete Journal, Vol. 74, 12, Dec. 2000, 693-699.

  202. “A Procedure to Assemble only Non-Zero Coefficients of Global Matrix in Finite Element Analysis”, by J. Rajasankar, Nagesh R. Iyer, and T.V.S.R. Appa Rao, Technical Note, Computers and Structures, 77, 2000, 595-599.

  203. “Dynamic response analysis of ship hull structures”, Appa Rao, T.V.S.R., Nagesh R. Iyer, J. Rajasankar and G.S. Palani, Intl. Jl. of Marine Technology, Vol 37, No. 3, Summer 2000, 117-128.

  204. ‘A posteriori error estimation and adaptive mesh refinement for reliable finite element solutions’, Nagesh R Iyer, Current Science, 10, Vol 77, Nov 1999, 1319-1324.

  205. ‘Analysis for Ship-Water Interaction Effects’, Nagesh R. Iyer, J. Rajasankar and T.V.S.R. Appa Rao, Jl. of Inst. Engineers(I), Aerospace Engg Div, 75, 3/95, 1995,1-5.

  206. ‘An Efficient Finite Element Model for Static and Vibration Analysis of Plates with Arbitrarily Located Eccentric Stiffeners’, G.S. Palani, Nagesh R. Iyer, and T.V.S.R. Appa Rao, Jl. of Sound and Vibration, Vol. 166, No. 3, 1993, 409-427.

  207. ‘A New 3-D Finite Element Model to Evaluate Added Mass for Analysis of Fluid-Structure Interaction Problems’, J. Rajasankar, Nagesh R. Iyer and T.V.S.R. Appa Rao, Intl. Jl. for Numerical Methods in Engineering, Vol. 36, 1993, 997-1012.

  208. ‘A Review of Error Analysis and Adaptive Refinement Methodologies in Finite Element Applications Part-II: Adaptive Refinements’, Nagesh R. Iyer and T.V.S.R. Appa Rao, Jl. of Structural Engineering, Vol. 19, 1992, 125-137.

  209. ‘An Efficient Algorithm for Vibration Analysis of Submerged/Floating Structures’, Nagesh R. Iyer, J. Rajasankar, G.S. Palani, and T.V.S.R. Appa Rao, Jl. of Structural Engineering, Vol. 19, 1992,139-142.

  210. ‘A Review of Error Analysis and Adaptive Refinement Methodologies in Finite Element Applications Part-I: Error Analysis’, Nagesh R. Iyer and T.V.S.R. Appa Rao, Jl. of Structural Engineering, Vol. 19, 1992, 77-94.

  211. ‘An Efficient Finite Element Model for Static and Vibration Analysis of Eccentrically Stiffened Plates/Shells’, G.S. Palani, Nagesh R. Iyer and T.V.S.R. Appa Rao, Computers & Structures, Vol. 43, 1992, 651-661.

  212. ‘Procedures for Dynamic Analysis and Design of Ship Hull Structures Subjected to Propeller-induced Excitations - A Critical Review’, Nagesh R. Iyer, J. Rajasankar, K.Z. Zachariah, G.S. Palani, and T.V.S.R. Appa Rao, Jl. of Institution of Engineers, Marine Engineering Division, Vol. 72, 1991,13-22.

  213. ‘Studies on Stress Concentration at Shell-Column Junctions of Hyperboloid Cooling Towers’, Nagesh R. Iyer and T.V.S.R. Appa Rao, Computers and Structures, 34, 1990,191-202.

  214. ‘Free Vibrations of a Cylindrical Shell by Holographic Interferometry’, A.G. Khadakkar, R. Narayanan, K. Ravisankar, Nagesh R. Iyer and T.V.S.R. Appa Rao, Jl. Sound and Vibration, 121(1), 1988,169-180.

  215. ‘Determination of the Torsional Stiffness of an Azimuth Tube with a Stiffened Opening by Holographic Interferometry’, A. G. Khadakkar, Nagesh R. Iyer, and T.V.S.R. Appa Rao, Optics and Lasers in Engineering, Vol.1, 1980, 147-159.

  216. ‘Deflection Measurement of a Cantilever Plate by Holographic Interferometry’, A.G. Khadakkar, R. Narayanan, and Nagesh R. Iyer, Jl. of Strain Measurement, Strain, April 1979, 62-64.

bottom of page